Bookmark and Share
 
At Waterproofing Solutions™, we have been waterproofing basement foundations since 1974. We know what works, and we can provide you with the most suitable solution to your basement’s water control problems. If the best solution is to waterproof your basement from the outside, we will use a mini excavator or hand dig if necessary.

Our system utilizes both air gap drainage membranes and structural waterproofing membranes for a permanent waterproofing solution that will last the life of the home.

 

AIR GAP DRAINAGE AND STRUCTURAL WATERPROOFING MEMBRANES

The air-gap drainage membrane, which is created by the impermeable dimpled sheet, guarantees a safe separation between the foundation wall and any ground moisture. Thus the membrane keeps water from ever touching the wall on its way through the soil to the footing drainage system. If water were to cross the sheet anywhere, the air-gap would allow it to drain without building up any hydrostatic pressure.

At Waterproofing Solutions™, we recommend to install a structural waterproofing membrane which will effectively seal your foundation walls permanently for the life of your home. Self-adhered “SBS” (rubber) waterproofing membrane low temperature formulation to (-14°C) factory controlled thickness and has self-healing properties that make it last under tougher conditions. Originally designed for commercial construction, SBS waterproofing membrane is the best waterproofing available.


DELTA®-MS

A dry basement is the perfect basis for a healthy and comfortable building. The DELTA® line of external foundation wall protection products will provide you with the right solution for your application.

DELTA®-MS is a highly effective foundation damp proofing and wall waterproofing system, based on a uniquely shaped air-gap membrane. It reliably keeps ground moisture away from the foundation wall – a key factor in achieving a permanently dry basement.

DELTA®-MS is a dimpled membrane, impermeable to water and water vapor. The vacuum formed exclusive dimple pattern creates an air-gap between the membrane and the foundation wall. This unique design allows any incidental water getting past the dimpled membrane to flow freely to the perimeter footing drain. The air-gap guarantees a safe separation and full capillary break between the foundation wall and any ground-moisture.

Unlike any spray-applied coating, DELTA®-MS bridges large cracks and imperfections in foundation walls.

This product can also be utilized as an effective protection layer over spray or sheet applied waterproofing systems.

DELTA®-MS is available in many sizes to cover any foundation with a minimum of overlaps and seams. The high compressive strength of the membrane is achieved due to a special dimple design and pattern, and ensures sustainable protection of foundation walls up to 12 ft below grade.



What is the Hydraway System?
The combination of two superior Hydraway products creates the most effective and state-of-the-art internal waterproofing system offered.


Hydraway 2000

A superior performing system. A cost effective replacement for perforated pipe and rock, "Drain Tile".

Hydraway Drain 2000 is made of heavy-duty, clog resistant geotextile fabric, permanently bonded to a rugged polyethylene lattice for strength and support.



 
   
 
Our Services and Products
 
   
   
   
   
   
   
   
   
   
   
 
Buy Products Online (soon!)
 
 
Your Basement and Crawl Space
 
   
   
   
 
About Waterproofing Solutions™